(ET200) Thermal conductive pad 2 mm

thermal transfer pad

Feature:Thermal conductive pad,insulator,self adhesive,shockproof,quakeproof,padding,pad
Application field ：The basic material of Thermally conductive pad is silicone, reinforced by glass fiber.With two side or one side gule. Often used to fill the gap between the heating element and radiator. thickness range is from 0.2mm to 15mm. uses in the electronic products, the electronic installation giving off heat the power component (integrated circuit, power tube, silicon-controlled rectifier, transformer and so on) with the radiation facility (radiator fin, aluminum system outer covering and so on) between the close contact, achieves the better heat conduction effect.

Note：1.standard color：gray,black,pink,blue,white,red

          2.standard thickness：0.2-15mm

          3.standard size：T(0.2~15mm)，W(200mm)，L(400mm)

          4.can made as client's requirement

Feature

Thermal Conductive 2.0w/m-k

Soft and high compression

Self-adhesive and rebound

Application

LED Light,LCD-TV/PDP,Power industry, Router, The solar industry,Power semiconductors
Avionics, Motor controls, Aerospace

Size

According to customer requirements

ET  series thermal  silicone sheet

Test Method

Typical Properties

fiber glass  With Silicone

--

Color

gray,black,pink,blue,white,red

VISUAL

Thickness(mm)

0.2-15

ASTM D374

Specification

Can custom manufacture 
by requirements 　

ASTM D1204

Desity g/cc

2.32±0.2

ASTM D792

Hardness Shore C

8~60

ASTM D2240

Thermal conductivity W/m.K（3mm）

2.0

ISO 22007-2

Thermal Resistance@20psi&1mm℃in2/W

2.20

ASTM D5470

Breakdown voltage 
KV/mm（1.0mm）

8

ASTM D149

Volue resistivity
Ω.cm

4.5*1010

ASTM D257

Compression ratio % @50psi

62

ASTMD575-1991

Tensile strength (Mpa)

0.55

ASTM D412-1998A

Elongation%

56.4

Dielectric strength
@1MHz

6.79

ASTM D150

Dielectirc loss

0.0057

UL certify

UL94V0

UL 94

Thermal gravimetry %（120℃,7d）

0.29

ASTM E595-2006

TOperating Temperature(℃)

-50~200

--

Remark： 
Torelance of Hardness: ±5
Dimension: 360mm×360mm，200mm×400mm Can be custom-made by required.
Thickness: Various of thickness for option, from 0.2mm to 14mm are available. 

Torelance of  Hardness: T＜1.0 ±0.1、1.0≤T＜3.0 ±0.25、3.0≤T＜6.0 ±0.35、6.0≤T＜10 ﹢0.7/﹣0.5、10＜T ﹢1.0/﹣0.5
All above data are copyrighted and elaborated by Eteng Ltd.

If you need other Thermal conductivity pad W/m.K,please see below link

(ET100) 1.0w/m-k
(ET150) 1.5w/m-k
(ET200) 2.0w/m-k
(ET250) 2.5w/m-k
(ET300) 3.0w/m-k
(ET350) 3.5w/m-k
(ET400) 4.0w/m-k
(ET500) 5.0w/m-k